Md1 Db And Ap Db Files Lenovo K4 Note

Return to site

Md1 Db And Ap Db Files Lenovo K4 Note

Updated on June 1, 2021. On this page, we have managed to share the Lenovo Stock ROM (Original firmware) for all Lenovo Smartphone and Tablets. All the following Lenovo Stock ROM (zip file) contains the original Lenovo USB Driver, Flash Tool, and the Flash File. After Downloading the firmware, follow the instruction manual to flash or install. Database Files(MD1DB and APDB) mod edit - link removed 4. Lenovo k3 note (ofcorse) install usb drivers, then extract sn write tools, run sn write.exe as admin, 1. Md1db And Apdb Files Lenovo K4 Note Downloaded the latest version for that software in their catalog they have written that ' added support for new MT65XX/MT67XX'. This Worked for me i have recoverd IMEI using that software.
Home » - Gapps-Tools-Tuto » TUTORIAL » Restore Fix Lost IMEI for All MTK
Title: Restore Fix Lost IMEI for All MTK
Listed: 05/29/2015 2:22 pm
ROM Version: Mtk65xx
You must be logged for ROM download.

Overall Rating : 11

Download Motherboard drivers for Windows, firmware, bios, tools, utilities. Lenovo K4 Note 6.0.1 Stock Rom Firmware Flash File Leave a Comment / LENOVO ROM / By Natwar Roy Welocme To Our Page www.xdarom.com.Now Download Official firmware Stock Rom.Latest & Final Version All SD Card firmware Download Now Free & without Password.Flash Your Smartphone Easy Only SD.

31700 total views, 8 today
27 Total favorites

Member Info
Listed by:Codered
Member Since: 11/23/2013
Private Message: Contact Me

DESCRIPTION
 1. Extract and install Maui META Software. Do not launch the program yet.
 2. Switch your phone on and connect it to your PC. Install MediaTek VCOM Drivers.
 3. Disconnect your phone and turn it off.
 4. Keeping Device Manager open and visible in the background, locate MauiMETA Program and Run as Administrator.
 5. Click on Options in the menu bar, and select 'Connect Smart phone into META mode'
 6. Click on Reconnect. Maui META will now ask you to 'Please connect cable to target and then power on'.
 7. Connect your phone to the PC, but DO NOT turn it on. Maui META will trigger the power up sequence. You should hear about 2 connect-disconnect sequence sounds from your PC.
 a. During the first connection to Maui META, your phone will boot partially while CDC VCOM Drivers are installed automatically. Wait for it to finish.
 b. After successful installation, you should see 'Gadget CDC VCOM Driver (COMxx)' in Device Manager.
 c. Even if the installation was successful, Maui META may still be unable to connect to your phone. If this is the case, close Maui META and disconnect your phone. Shut your phone off manually.
 d. Run Maui META as administrator again and repeat step 5 to 7 and proceed to step 8.
 8. Check if the connection was successful.
 It is successful if you see the following:
 Your phone will appear in Device Manager as a Gadget CDC VCOM Driver (COMxx)
 Maui META indicates 'Connected with Target' and shows your RF chip versions
 Your phone shows a static boot logo
 If the connection was successful, proceed to step 9. However, f your phone shows as a MediaTek Preloader in Device Manager, or if your phone starts charging via USB, follow the steps below.
 a. Go to Device Manager, highlight your phone in the list and right-click on it. Choose to update drivers manually, then point to this folder: (D:…MTK_USB_ADB_UltimateAll MTK USB Driver 2014 Properties)
 b. Disconnect your phone, and repeat steps 5 to 8.
 c. If you are continuously returning to these sub-steps, try using a different USB port.
 (note: If your phone is not showing in Device Manager at all, uninstall drivers. Download USBdeview software, Run as Administrator, then uninstall your phone's Device IDs. Restart at step 2.)
 9. Once your phone boots into META mode, a Get Version pop up window will appear. Ignore and close this window.
Restoring Values
 From here, there are two possible methods to go through. If the Update Parameter does not work (i.e. no successful flash message), do method B.
A. Update Parameter
 A.1. In the main Maui META window, click on the drop down menu and select Update Parameter.
 A.2. At the bottom of the pop up window, tick Barcode.
 A.3. Click on 'Change NVRAM Database' and select the NVRAM Database file that is suitable for your current ROM. Click Open.
 A.4. Click on 'Load from File' and select the .ini file that is compatible with your phone.
 A.5. Click on Download to Flash and wait for this message: 'Download Barcode Settings to flash successfully'.
B. Barcode Download + IMEI Download
B.1. Barcode Download
 B.1.1. In the main Maui META window, click on the drop down menu and select Barcode Download.
 B.1.2. Click on 'Change NVRAM Database' and select the NVRAM Database file that is suitable for your current ROM. Click Open.
 B.1.3. Type in the Serial Number you obtained from the back of the phone.
(If you are restoring a backup, click on 'Load from File' and select the appropriate .ini file.)
Md1 Db And Ap Db Files Lenovo K4 Note 8 B.1.4. Click on 'Download to Flash'. Check the bottom of the window to see if the flash was successful.
 B.1.5. Close the Barcode Download window.
B.2 IMEI Download
 B.2.1. In the main Maui META window, click on the drop down menu and select IMEI Download.
 B.2.2 Click on 'Change NVRAM Database' and select the NVRAM Database file that is compatible with your current ROM version. Click Open.
 B.2.3. In the SIM1 tab, type in the IMEI for SIM1. (Note: the last number of the IMEI goes into the checksum box.)
 B.2.4. Click on SIM2 tab, and enter the IMEI for SIM2.
(If you are restoring a backup, select 'Load From File' and select the appropriate .ini file. You only need to load this once for both IMEI numbers.)
 B.2.5. Click on 'Download to Flash'. Check the bottom of the window to see if the flash was successful.
Exiting META Mode
 1. Close all pop-up windows.
 2. Click on Disconnect, you should see a message saying 'Please Standby'
 3. Wait for Gadget CDC VCOM Driver to disappear from Device Manager List.
 4. Wait for your phone to shutdown and enter charging mode.
 5. Close Maui META and disconnect your phone.
 You may now reboot your phone and check via *#66# and *#06# if you now have a valid Serial Number and IMEI Numbers.
 Source: Gizbeat

※Please make a backup of your device before installing or updating ROM

Method 1: SN Write Tool
NVRAM files extensions called APDB and BPLGU only can load on with this.
Md1 Db And Ap Db Files Lenovo K4 Note Universal MicThis tool does not support other extensions like SPNV, TAR or Bin. These are a different backup and other tools can handle and support.
The SN writer tool as far as my experience is working on a Windows Operating System and support MediaTek Chipsets.
I give basic steps on how to use this tool.
Step 1 . Download SN Writer Tool below and extract it to your Computer.
Step 2 . Run the SN writer.exe
Step 3 . Click on the comport. select USB VCOM
Step 4 . In the target Type option, Select Smartphone or Feature phone
Step 5 . Click the System Config, There is configuration IMEI, Bluetooth, Wifi. Make it select these 3
Step 6 . Select IMEI option Dual SIM if your device is Dual SIM.
Step 7 . In under Database File, Browse the NVRAM Firmware you download for your device
MD1_DB is for (AppSrcP BPLGUI) and AP_DB is for APDB
Example :AP_DB is for file APDB_MT6572_S01_ALPS.JB3.MP
 MD1_DB is for file BPLGUInfoCustomAppSrcP_MT6572_S00_MOLY_WR8
Step 8 . Click now the save button and Scan data appear to write an IMEI, WIFI, Bluetooth and click OK and Start Button
Step 9. Connect Phone to a USB port of PC in power off mode and plug-out the battery or boot to Meta mode.
Step 10. After writing IMEI, You will see Green Pass prompt. and your job is Done.
Other Steps and what PC driver you need.
Be sure you have Driver CDC Gadget Serial installed to your PC There is the Advance connection in Option which is connected to operate on META or AT. You can download Meta driver and Mediatek CDC VCOM ADB BROM preloader HERE.
If you want to know more how to installed manual driver of most MediatekHERE.
Version Download credits to snwritetool.com

Md1 db and ap db files lenovo k4 note battery

Download Motherboard drivers for Windows, firmware, bios, tools, utilities. Lenovo K4 Note 6.0.1 Stock Rom Firmware Flash File Leave a Comment / LENOVO ROM / By Natwar Roy Welocme To Our Page www.xdarom.com.Now Download Official firmware Stock Rom.Latest & Final Version All SD Card firmware Download Now Free & without Password.Flash Your Smartphone Easy Only SD.

31700 total views, 8 today
27 Total favorites

Member Info
Listed by:Codered
Member Since: 11/23/2013
Private Message: Contact Me

DESCRIPTION
 1. Extract and install Maui META Software. Do not launch the program yet.
 2. Switch your phone on and connect it to your PC. Install MediaTek VCOM Drivers.
 3. Disconnect your phone and turn it off.
 4. Keeping Device Manager open and visible in the background, locate MauiMETA Program and Run as Administrator.
 5. Click on Options in the menu bar, and select 'Connect Smart phone into META mode'
 6. Click on Reconnect. Maui META will now ask you to 'Please connect cable to target and then power on'.
 7. Connect your phone to the PC, but DO NOT turn it on. Maui META will trigger the power up sequence. You should hear about 2 connect-disconnect sequence sounds from your PC.
 a. During the first connection to Maui META, your phone will boot partially while CDC VCOM Drivers are installed automatically. Wait for it to finish.
 b. After successful installation, you should see 'Gadget CDC VCOM Driver (COMxx)' in Device Manager.
 c. Even if the installation was successful, Maui META may still be unable to connect to your phone. If this is the case, close Maui META and disconnect your phone. Shut your phone off manually.
 d. Run Maui META as administrator again and repeat step 5 to 7 and proceed to step 8.
 8. Check if the connection was successful.
 It is successful if you see the following:
 Your phone will appear in Device Manager as a Gadget CDC VCOM Driver (COMxx)
 Maui META indicates 'Connected with Target' and shows your RF chip versions
 Your phone shows a static boot logo
 If the connection was successful, proceed to step 9. However, f your phone shows as a MediaTek Preloader in Device Manager, or if your phone starts charging via USB, follow the steps below.
 a. Go to Device Manager, highlight your phone in the list and right-click on it. Choose to update drivers manually, then point to this folder: (D:…MTK_USB_ADB_UltimateAll MTK USB Driver 2014 Properties)
 b. Disconnect your phone, and repeat steps 5 to 8.
 c. If you are continuously returning to these sub-steps, try using a different USB port.
 (note: If your phone is not showing in Device Manager at all, uninstall drivers. Download USBdeview software, Run as Administrator, then uninstall your phone's Device IDs. Restart at step 2.)
 9. Once your phone boots into META mode, a Get Version pop up window will appear. Ignore and close this window.
Restoring Values
 From here, there are two possible methods to go through. If the Update Parameter does not work (i.e. no successful flash message), do method B.
A. Update Parameter
 A.1. In the main Maui META window, click on the drop down menu and select Update Parameter.
 A.2. At the bottom of the pop up window, tick Barcode.
 A.3. Click on 'Change NVRAM Database' and select the NVRAM Database file that is suitable for your current ROM. Click Open.
 A.4. Click on 'Load from File' and select the .ini file that is compatible with your phone.
 A.5. Click on Download to Flash and wait for this message: 'Download Barcode Settings to flash successfully'.
B. Barcode Download + IMEI Download
B.1. Barcode Download
 B.1.1. In the main Maui META window, click on the drop down menu and select Barcode Download.
 B.1.2. Click on 'Change NVRAM Database' and select the NVRAM Database file that is suitable for your current ROM. Click Open.
 B.1.3. Type in the Serial Number you obtained from the back of the phone.
(If you are restoring a backup, click on 'Load from File' and select the appropriate .ini file.)
Md1 Db And Ap Db Files Lenovo K4 Note 8 B.1.4. Click on 'Download to Flash'. Check the bottom of the window to see if the flash was successful.
 B.1.5. Close the Barcode Download window.
B.2 IMEI Download
 B.2.1. In the main Maui META window, click on the drop down menu and select IMEI Download.
 B.2.2 Click on 'Change NVRAM Database' and select the NVRAM Database file that is compatible with your current ROM version. Click Open.
 B.2.3. In the SIM1 tab, type in the IMEI for SIM1. (Note: the last number of the IMEI goes into the checksum box.)
 B.2.4. Click on SIM2 tab, and enter the IMEI for SIM2.
(If you are restoring a backup, select 'Load From File' and select the appropriate .ini file. You only need to load this once for both IMEI numbers.)
 B.2.5. Click on 'Download to Flash'. Check the bottom of the window to see if the flash was successful.
Exiting META Mode
 1. Close all pop-up windows.
 2. Click on Disconnect, you should see a message saying 'Please Standby'
 3. Wait for Gadget CDC VCOM Driver to disappear from Device Manager List.
 4. Wait for your phone to shutdown and enter charging mode.
 5. Close Maui META and disconnect your phone.
 You may now reboot your phone and check via *#66# and *#06# if you now have a valid Serial Number and IMEI Numbers.
 Source: Gizbeat

※Please make a backup of your device before installing or updating ROM

Method 1: SN Write Tool
NVRAM files extensions called APDB and BPLGU only can load on with this.
Md1 Db And Ap Db Files Lenovo K4 Note Universal MicThis tool does not support other extensions like SPNV, TAR or Bin. These are a different backup and other tools can handle and support.
The SN writer tool as far as my experience is working on a Windows Operating System and support MediaTek Chipsets.
I give basic steps on how to use this tool.
Step 1 . Download SN Writer Tool below and extract it to your Computer.
Step 2 . Run the SN writer.exe
Step 3 . Click on the comport. select USB VCOM
Step 4 . In the target Type option, Select Smartphone or Feature phone
Step 5 . Click the System Config, There is configuration IMEI, Bluetooth, Wifi. Make it select these 3
Step 6 . Select IMEI option Dual SIM if your device is Dual SIM.
Step 7 . In under Database File, Browse the NVRAM Firmware you download for your device
MD1_DB is for (AppSrcP BPLGUI) and AP_DB is for APDB
Example :AP_DB is for file APDB_MT6572_S01_ALPS.JB3.MP
 MD1_DB is for file BPLGUInfoCustomAppSrcP_MT6572_S00_MOLY_WR8
Step 8 . Click now the save button and Scan data appear to write an IMEI, WIFI, Bluetooth and click OK and Start Button
Step 9. Connect Phone to a USB port of PC in power off mode and plug-out the battery or boot to Meta mode.
Step 10. After writing IMEI, You will see Green Pass prompt. and your job is Done.
Other Steps and what PC driver you need.
Be sure you have Driver CDC Gadget Serial installed to your PC There is the Advance connection in Option which is connected to operate on META or AT. You can download Meta driver and Mediatek CDC VCOM ADB BROM preloader HERE.
If you want to know more how to installed manual driver of most MediatekHERE.
Version Download credits to snwritetool.com
SN_Write_Tool_v1.1528.00.zip
Method 2: Maui META MTK 3G
The package contains tutorial and video how it works to write IMEI to phone.
Download Package below
MauiMETA MTK exe_3G_v8.1520.0